Apogee ProTools HDX Interface w/2X6 Line

Description

Apogee ProTools HDX Interface w/2X6 Line.

Symphony I/O Mk II is a multi-channel audio interface featuring Apogees flagship AD/DA conversion, modular I/O (up to 32 inputs and outputs), intuitive touchscreen display and optional world-class microphone preamps. Designed to deliver professional sound quality for audio recording, mixing and mastering, Symphony I/O Mk II is the ultimate music production centerpiece for any modern studio. With its option card flexibility, Symphony I/O Mk II can provide direct connectivity to one of 4 different platforms Thunderbolt, Pro Tools HD, Dante+ Pro Tools HD, or Waves SoundGrid network.
Features:

• Best AD/DA conversion of any Thunderbolt audio interface
• Up to 32 channels of modular analog I/O with optional mic preamps
• Best per-channel value of any interface in its category
• Choice of Thunderbolt (Mac), Pro Tools HD (Mac/PC), Dante+ Pro Tools HD (Mac/PC, or Waves SoundGrid (Mac/PC) connectivity.
• Ultra-low latency performance 1.35 ms with Thunderbolt and Logic Pro X
• Advanced Monitor Workflows featuring plug and play Atmos configuration
• All new, highly customizable Symphony Control software provides easy access to all I/O parameters
• Intuitive touchscreen display and front panel control
• Designed in California, Built in the U.S.A.

Apogee Symphony I/O MKII Pro Tools HD Chassis with 2×6 Analog I/O + 8×8 Optical + AES I/O + 2-Ch S/PDIF

Low Cost Per Channel. Superior Sound Quality.

Symphony I/O Mk II HD is designed for the Pro Tools HD user who needs a multi-channel audio interface with the best sound quality at an incredible cost per channel value. Whether using a Mac or PC based studio, Symphony I/O Mk II HD can connect directly to your Pro Tools HDX, Pro Tools HD Native or Pro Tools Core/Accel systems.

Symphony I/O Mk II HD can be utilized alongside or in place of Avid or Digidesign interfaces for Pro Tools HD. In fact, each I/O module installed in Symphony I/O Mk II HD appears and functions in Pro Tools HD the same if it were a separate Avid HD I/O interface, so set up is easy and you can take advantage of important Pro Tools features such as sample-accurate delay compensation.

A single Symphony I/O Mk II HD unit can have up to 32 simultaneous analog I/O, so you can have more channels with less rack gear. Need even more channels? You can utilize multiple units simultaneously, with one Symphony I/O Mk II HD per every Pro Tools HD port in your system. Calibrating your I/O is easy with Symphony I/O Mk II HDs front panel touchscreen.

Highlights

• Best performance of any multi-channel Pro Tools HD interface
• Best cost per channel value of any Pro Tools HD interface solution
• Connects directly to any Pro Tools HD system (Mac or PC)
• Emulates Avid HD I/O interface, including sample-accurate delay compensation
• Connect multiple units in a single system (1 unit per HD port)
• Easy I/O calibration with front panel touchscreen

Inputs

• • Analog IN: 2 balanced inputs on 2 female XLR connectors
  • AES IN: Stereo input on 1 female XLR connector
  • Optical IN: Supports ADAT, SMUX & S/PDIF
    • ADAT: 8 channels 44.1-48 kHz on 1 Toslink connector
    • SMUX: 4 channels 88.2-96 kHz on 1 Toslink connector
    • S/PDIF: 2 channels, up to 96 kHz on 1 Toslink connector
  • S/PDIF Coax IN: 2 channels, up to 192 kHz on 1 RCA connector

A/D

• THD+N of -116dB @23dBu (0.00016%) unweighted
• Dynamic range: 124 dB (A) of dynamic range
• Maximum input levels:
  • +4dB setting: +24dBu
  • -10dB setting: +6dBV
• Frequency response at 44.1kHz: 1-20,000 Hz (+/- 0.05dB)
• Input impedance: 10K

Outputs

• Analog OUT: 6 balanced outputs on 1 DSUB 25-pin connector
• AES OUT: Stereo output on 1 male XLR connector
• Optical OUT: Supports ADAT, SMUX & S/PDIF
  • ADAT: 8 channels 44.1-48 kHz on 1 Toslink connector
  • SMUX: 4 channels 88.2-96 kHz on 1 Toslink connector
  • S/PDIF: 2 channels, up to 96 kHz on 1 Toslink connector
• S/PDIF Coax OUT: 2 channels, up to 192 kHz on 1 RCA connector

D/A

• THD+N of -118dB @ 22dBu (0.00013%) unweighted
• Dynamic range: 131dB (A) dynamic range
• Max output levels to +24dBu
• Frequency response at 44.1 kHz: dc to 20kHz (+/- 0.05dB)
• Output impedance: 25 Ohm