Doepfer A-100MC MINI-CASE RAW w/ Power Supply

Description

DOEPFER A-100MC MINI-CASE RAW w/ POWER SUPPLY.

Doepfer A-100MC Mini Case raw is a true beauty to start your modular system with. It can house 4 8HP wide modules, it is truly cost-effective, and can fit in your backpack.

Features:

• A-100 miniature case (“A-100 beauty case“)
• built-in A-100 miniature power supply/bus boardwith higher output current(200 mA @ +/-12V and 50 mA @ +5V)
• useable width:32 HP(e.g. four modules with 8 HP),new since September 2008, the former version had only 28 HP available
• 4 bus connectors (i.e. max. 4 modules)
• alternatively raw wood (top right picture) or or black coated (top left picture), the raw version may be varnished by the customer in any desired color (e.g. with a color spray can, see red example)
• outside measures:about 180 width x 155 height x 125 depth
• max. module depth in the left area: about 55 mm (because of the heat sinks of the power supply), the width of the area with the reduced depth is about 60 mm
• max. module depth in the right area: about 85 mm, the width of the area with the non-reduced depth is about 100 mm
• pay attention to the suitable module widths if you order the modules, e.g. A-112, A-113, A-126 or A-199 (because of the spring reverb tank) cannot be mounted into the A-100MC
• the handles on top of the cases are enclosed but not mounted, two holes with about 3 mm diameter have to be drilled to mount the handle, if the miniatures cases have to be stacked on top of each other the handles have to be omitted
• prices include the built-in miniature power supply/bus
• prices do not include modules
• versions with transformer include an external transformer (wall outlet type) with 230 V mains voltage and European mains connector.
• for versions without transformer an external transformer with 9VACvoltage output and 500mA (or more) is required, attention: DC power supplies are not suitable !